ZyXEL Communications MSC1000G Series, User Manual, Page: 376 / 1168

Chapter 11 Profile Screens
Management Switch Card User’s Guide
376
11.20 Profile VoIP SIP Call Service Screen
Use this screen to configure the call service information used by the system. You can then select a
set of call service information (known as a profile) and assign it to a port in the
Port > VoIP SIP
screen.
Click Profile > VoIP SIP CALLSVC . The following screen displays.
RTP Port H.323 or SIP VoIP calls use RTP (Real time Transport Protocol) for the voice data
transfer. Use these fields to specify a range of ports to use for the VoIP voice data
transfer. See RFC 1889 for details on RTP.
Apply Click Apply to save the changes in this screen to the system’s volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
New While you are modifying a profile, you can click New to start configuring a fresh
profile without saving your changes.
Cancel Click Cancel to start configuring the screen again.
The bottom part of the screen lists the configured profiles.
Index This is the port profile index number.
Name These are the names of individual profiles. The DEFVAL profile always exists, and
is assigned to all ports by default.
Sip Server IP / Domain
Name This displays the IP address or domain name of your VoIP provider’s SIP server.
Modify Select a profile’s Select radio button and click Modify to edit the profile.
Delete Select a profile’s Select radio button and click Delete to remove the profile.
Table 177
Profile > VoIP SIP
LABEL DESCRIPTION