ZyXEL Communications MSC1000G Series, User Manual

Page: 148 / 1168

Chapter 5 Alarm Screens
Management Switch Card User’s Guide
148
5.2 History Alarm Screen
Click Alarm > History Alarm to display the screen where you can view all historic alarms. You can
also click a tab to view the alarms only specific to one severity level.
Figure 80
History Alarm: All
The following table describes the labels in this screen.
Condition This is the alarm condition.
Severity This is the severity level ( critical , major , minor , info or all ) of alarms.
Timestamp This is the time when the alarm occurred.
Source This is the location where the alarm occurred.
Previous 10 Click Previous 10 to show the preceding 10 pages of information.
Previous
Next
Click Previous or Next to show the preceding/following screen if the information cannot be
displayed in one screen.
Next 10 Click Next 10 to show the following 10 pages of alarms.
Table 55
Current Alarm: All (continued)
LABEL DESCRIPTION
Table 56
History Alarm: All
LABEL DESCRIPTION
UP Click UP to go to the System Info screen.
Show All Select the radio button to display all alarms.
Show Alarm
From To (YYYY/
MM/DD) Select the radio button and specify a range of time in the year/month/day format to display
the alarms occur during this period only.
Apply Click Apply to display the alarms (either all or from the time range you selected).