Chapter 42 Access Control
MGS3520 Series User’s Guide
355
42.3.4 Configuring SNMP
Click
Management
>
Access Control
>
SNMP
to view the screen as shown. Use this screen to
configure your SNMP settings.
Table 177
SNMP Switch Traps
OPTION
OBJECT LABEL
OBJECT ID
DESCRIPTION
stp
STPNewRoot
1.3.6.1.2.1.17.0.1
This trap is sent when the STP root switch changes.
zyMrstpNewRoot
1.3.6.1.4.1.890.1.15
.3.52.3.1
This trap is sent when the MRSTP root switch
changes.
zyMstpNewRoot
1.3.6.1.4.1.890.1.15
.3.53.3.1
This trap is sent when the MSTP root switch changes.
STPTopologyChange
1.3.6.1.2.1.17.0.2
This trap is sent when the STP topology changes.
zyMrstpTopologyChange
1.3.6.1.4.1.890.1.15
.3.52.3.2
This trap is sent when the MRSTP topology changes.
zyMstpTopologyChange
1.3.6.1.4.1.890.1.15
.3.53.3.2
This trap is sent when the MSTP root switch changes.
mactable
zyMacForwardingTableFull
1.3.6.1.4.1.890.1.15
.3.48.2.1
This trap is sent when more than 99% of the MAC
table is used.
zyMacForwardingTableFullReco
vered
1.3.6.1.4.1.890.1.15
.3.48.2.2
This trap is sent when the MAC address switching
table has become normal from full.
rmon
RmonRisingAlarm
1.3.6.1.2.1.16.0.1
This trap is sent when a variable goes over the RMON
"rising" threshold.
RmonFallingAlarm
1.3.6.1.2.1.16.0.2
This trap is sent when the variable falls below the
RMON "falling" threshold.
cfm
dot1agCfmFaultAlarm
1.3.111.2.802.1.1.8.
0.1
The trap is sent when the Switch detects a
connectivity fault.
