![ZyXEL Communications MGS3520 Series User Manual Download Page 123](http://html.mh-extra.com/html/zyxel-communications/mgs3520-series/mgs3520-series_user-manual_945747123.webp)
Chapter 11 Static Multicast Forward Setup
MGS3520 Series User’s Guide
123
Figure 62
Static Multicast Forwarding to Multiple Ports
11.2 Configuring Static Multicast Forwarding
Use this screen to configure rules to forward specific multicast frames, such as streaming or control
frames, to specific port(s).
Click
Advanced Application
>
Static Multicast Forwarding
to display the configuration screen
as shown.
Figure 63
Advanced Application > Static Multicast Forwarding
The following table describes the labels in this screen.
Table 37
Advanced Application > Static Multicast Forwarding
LABEL
DESCRIPTION
Active
Select this check box to activate your rule. You may temporarily deactivate a rule without
deleting it by clearing this check box.
Name
Type a descriptive name (up to 32 printable ASCII characters) for this static multicast MAC
address forwarding rule. This is for identification only.
MAC Address
Enter a multicast MAC address which identifies the multicast group. The last binary bit of the
first octet pair in a multicast MAC address must be 1. For example, the first octet pair
00000001 is 01 and 00000011 is 03 in hexadecimal, so 01:00:5e:00:00:0A and
03:00:5e:00:00:27 are valid multicast MAC addresses.