ZyXEL Communications MGS-3712, User Manual

Page: 243 / 308

Chapter 29 Access Control
MGS-3712/MGS-3012F User’s Guide
243
29.3.4 Configuring SNMP
Click Management > Access Control > SNMP to view the screen as shown. Use this screen
to configure your SNMP settings.
Table 92 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP root
switch changes.
MRSTPNewRoot MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.32.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.32.2.1
This trap is sent when the MRSTP
root switch changes.
MSTPNewRoot MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.107.7
0.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.107.7
0.1
This trap is sent when the MSTP root
switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP
topology changes.
MRSTPTopologyChange MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.32.2.2
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.32.2.2
This trap is sent when the MRSTP
topology changes.
MSTPTopologyChange MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.107.7
0.2
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.107.7
0.2
This trap is sent when the MSTP root
switch changes.
mactable MacTableFullEventOn MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.25.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.25.2.1
This trap is sent when more than
99% of the MAC table is used.
MacTableFullEventClear MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.25.2.2
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.25.2.2
This trap is sent when less than 95%
of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.2.1.16.0.1 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.2.1.16.0.2 This trap is sent when the variable
falls below the RMON "falling"
threshold.