Chapter 35 DHCP
XMG1930 Series User’s Guide
294
35.4.8 Example: DHCP Relay for Two VLANs
The following example displays two VLANs (VIDs 1 and 2) for a campus network. Two DHCP servers are
installed to serve each VLAN. The system is set up to forward DHCP requests from the dormitory rooms
(VLAN 1) to the DHCP server with an IP address of 192.168.1.100. Requests from the academic buildings
(VLAN 2) are sent to the other DHCP server with an IP address of 172.16.10.100.
Figure 205
DHCP Relay for Two VLANs
For the example network, configure the
VLAN Setting
screen as shown.
Figure 206
DHCP Relay for Two VLANs Configuration Example
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Select the entries that you want to remove, then click the
Delete
button to remove the selected
entries from the table.
Cancel
Click this to clear the check boxes above.
Table 150 IP Application > DHCP > DHCPv4 > VLAN > Port (continued)
LABEL
DESCRIPTION
VLAN 1
VLAN 2
EXAMPLE
