Chapter 9 VLAN
MES3500 Series User’s Guide
94
9.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port.
See
for more information on static VLAN. Click the
VLAN Port Setting
link
in the
VLAN Status
screen.
Figure 40
Advanced Application > VLAN > VLAN Port Setting
Control
Select
Normal
for the port to dynamically join this VLAN group using GVRP. This is the
default selection.
Select
Fixed
for the port to be a permanent member of this VLAN group.
Select
Forbidden
if you want to prohibit the port from joining this VLAN group.
Tagging
Select
TX Tagging
if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
Add
Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Clear
Click
Clear
to start configuring the screen again.
VID
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
Active
This field indicates whether the VLAN settings are enabled (
Yes
) or disabled (
No
).
Name
This field displays the descriptive name for this VLAN group.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the
Delete
check boxes.
Table 19
Advanced Application > VLAN > Static VLAN (continued)
LABEL
DESCRIPTION
Summary of Contents for MES3500 Series
