Chapter 17 Link Aggregation
MES3500 Series User’s Guide
149
17.5 Link Aggregation Control Protocol
Click in the
Advanced Application
>
Link Aggregation
>
Link Aggregation Setting
>
LACP
to
display the screen shown next. See
for more information on dynamic link
aggregation.
Figure 77
Advanced Application > Link Aggregation > Link Aggregation Setting > LACP
Port
This field displays the port number.
Group
Select the trunk group to which a port belongs.
Note: When you enable the port security feature on the Switch and configure port security
settings for a port, you cannot include the port in an active trunk group.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 49
Advanced Application > Link Aggregation > Link Aggregation Setting (continued)
LABEL
DESCRIPTION
Summary of Contents for MES3500 Series
