manualshive.com logo in svg

ZyXEL Communications MES-3528 -, User Manual

The ZyXEL Communications MES-3528 is a robust and efficient network switch designed to meet the demands of large-scale businesses. With its advanced features and high performance, this product ensures seamless and secure data transmission. Users can find detailed technical specifications and setup instructions in the free brochure and manual available for download at manualshive.com.

Share
Download
background image

 Chapter 9 VLAN

MES-3528 User’s Guide

103

9.8  Protocol Based VLANs 

Protocol based VLANs allow you to group traffic into logical VLANs based on the 
protocol you specify. When an upstream frame is received on a port (configured 
for a protocol based VLAN), the Switch checks if a tag is added already and its 
protocol. The untagged packets of the same protocol are then placed in the same 
protocol based VLAN. One advantage of using protocol based VLANs is that priority 
can be assigned to traffic of the same protocol.

Note: Protocol based VLAN applies to un-tagged packets and is applicable only when 

you use IEEE 802.1Q tagged VLAN.

For example, port 1, 2, 3 and 4 belong to static VLAN 100, and port 4, 5, 6, 7 
belong to static VLAN 120. You configure a protocol based VLAN A with priority 3 
for ARP traffic received on port 1, 2 and 3. You also have a protocol based VLAN B 
with priority 2 for Apple Talk traffic received on port 6 and 7. All upstream ARP 
traffic from port 1, 2 and 3 will be grouped together, and all upstream Apple Talk 

VID

Enter the ID of a VLAN with which the untagged frames from the IP subnet 
specified in this subnet based VLAN are tagged. This must be an existing 
VLAN which you defined in the Advanced Applications > VLAN screens.

Priority

Select the priority level that the Switch assigns to frames belonging to this 
VLAN.

Add

Click Add to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Index

This is the index number identifying this subnet based VLAN. Click on any 
of these numbers to edit an existing subnet based VLAN.

Active

This field shows whether the subnet based VLAN is active or not.

Name

This field shows the name the subnet based VLAN.

IP

This field shows the IP address of the subnet for this subnet based VLAN. 

Mask-Bits

This field shows the subnet mask in bit number format for this subnet 
based VLAN. 

VID

This field shows the VLAN ID of the frames which belong to this subnet 
based VLAN.

Priority

This field shows the priority which is assigned to frames belonging to this 
subnet based VLAN.

Delete

Click this to delete the subnet based VLANs which you marked for deletion. 

Cancel

Click Cancel to begin configuring this screen afresh.

Table 18   

Advanced Application > VLAN > VLAN Port Setting > Subnet Based VLAN 

Setup  (continued)

LABEL

DESCRIPTION

Summary of Contents for MES-3528 -













































































































































































































































































































































































Reviews:

No comments

Related manuals for MES-3528 -

Datavideo SE-3000 Instruction Manual preview
SE-3000
Brand: Datavideo Pages: 58
WAGO 852-111 Mounting, Installation And Handling preview
852-111
Brand: WAGO Pages: 39
Tecsis MagSwitch Operating Manual preview
MagSwitch
Brand: Tecsis Pages: 2
Adler ASM512 Installation, Maintenance And Operating Manual Instruction preview
ASM512
Brand: Adler Pages: 8
Dell EMC PowerSwitch Z9332F-ON Setup Manual preview
PowerSwitch Z9332F-ON
Brand: Dell EMC Pages: 16
LevelOne FEP-0800 Quick Installation Manual preview
FEP-0800
Brand: LevelOne Pages: 17
König KNVMA3444 Instruction preview
KNVMA3444
Brand: König Pages: 8
Black Box ServSwitch KV1510A User Manual preview
ServSwitch KV1510A
Brand: Black Box Pages: 16
G-Lab GSC-3 User Manual preview
GSC-3
Brand: G-Lab Pages: 12
N-Tron 708M12 User Manual & Installation Manual preview
708M12
Brand: N-Tron Pages: 169
Black Box SW540A-R3 Manual preview
SW540A-R3
Brand: Black Box Pages: 31
AMX AVS-OCT-3264-360 Product View preview
AVS-OCT-3264-360
Brand: AMX Pages: 1
Leaksafe Solutions WaterSwitch2 Installation Instructions Manual preview
WaterSwitch2
Brand: Leaksafe Solutions Pages: 12
Vanco Evolution EVMX4442 Manual preview
Evolution EVMX4442
Brand: Vanco Pages: 12
Konig KN-HDMIMAT20 Manual preview
KN-HDMIMAT20
Brand: Konig Pages: 52
Luminex DMX512-A 2.10 HUB User Manual preview
DMX512-A 2.10 HUB
Brand: Luminex Pages: 12
Moxa Technologies EDS-2005-EL Series Quick Installation Manual preview
EDS-2005-EL Series
Brand: Moxa Technologies Pages: 14
FS S5850-24S2C Quick Start Manual preview
S5850-24S2C
Brand: FS Pages: 43

Brands by name

Popular brands

Load more brands