ZyXEL Communications MAX318M2W, User Manual

Page: 120 / 294

Chapter 7 Network Settings
MAX318M2W User’s Guide
120
This screen contains the following fields:
7.21 Technical Reference
The following section contains additional technical information about the WiMAX
Device features described in this chapter.
7.21.1 WiFi Protected Setup (WPS)
Your WiMAX Device supports WiFi Protected Setup (WPS), which is an easy way to
set up a secure wireless network. WPS is an industry standard specification,
defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Each WPS connection works
between two devices. Both devices must support WPS (check each device’s
documentation to make sure).
Depending on the devices you have, you can either press a button (on the device
itself, or in its configuration utility) or enter a PIN (a unique Personal Identification
Number that allows one device to authenticate the other) in each of the two
devices. When WPS is activated on a device, it has two minutes to find another
device that also has WPS activated. Then, the two devices connect and set up a
secure network by themselves. This WiMAX Device supports Push Button
Configuration only at the time of writing.
Table 45 Content Filter
LABEL DESCRIPTION
URL List
Enable URL
Filter
Select this employ the content filter to allow (“whitelist”) or block
(“blacklist”) specific URL connections made through the WiMAX Device.
Blacklist/
Whitelist
Select whether the current filtering applies to the blacklist (sites that
are blocked) or the whitelist (sites that are allowed).
URL Filter Rule
Active
Indicates whether the current URL filter is active or not.
URL Indicates the URL to be filtered according to blacklist or whitelist rules.
Delete Click this to delete a specified rule.
Add Click this to add a new filter rule.
OK Click this to save any changes made to the list.