ZyXEL Communications MAX318M2W, User Manual

Page: 102 / 294

Chapter 7 Network Settings
MAX318M2W User’s Guide
102
7.11 Static Route
Use these settings to create fixed paths through the network.
Click Network Setting > Route > Static Route to open this screen as shown
next.
Figure 43 Static Route Screen
This screen contains the following fields:
7.12 Static Route Add
Use these settings to configure a static route.
Click Add in the Network Setting > Route > Static Route screen to open this
screen as shown next.
Figure 44 Static Route Screen
Table 34 Static Route
LABEL DESCRIPTION
Destination This field displays the destination IP address of the static route.
Subnet Mask This field displays the subnet mask of the static route.
Next Hop This field displays next hop information of the static route.
Metric This field displays the static route metric.
Add Click this to add a new static route to the list.