ZyXEL Communications MAX218M2W, User Manual

Page: 203 / 306

Chapter 14 Product Specifications
MAX208M2W Series User’s Guide
199
14.1 Wall-Mounting
This section shows you how to mount your MAX208M2W Series on a wall using the
ZyXEL Wall-Mounting kit (not included).
14.1.1 The Wall-Mounting Kit
The wall-mounting kit contains the following parts:
1
Two Mortar Plugs (M4*L30 mm)
2
Two Screws (M4*L30 mm)
3
Wall-Mounting Chassis
If any parts are missing, contact your vendor.
14.1.2 Instructions
To mount the MAX208M2W Series on a wall:
1
Select a position free of obstructions on a sturdy wall.
2
Drill two holes in the wall exactly 70 mm apart. The holes should be 6 mm wide
and at least 30 mm deep.
Be careful to avoid damaging pipes or cables located inside the
wall when drilling holes for the screws.
1 2 3