ZyXEL Communications MAX218M2W, User Manual, Page: 184 / 306

Chapter 12 Maintenance
MAX208M2W Series User’s Guide
180
If the upload was not successful, you are notified with an error message.
12.16 Factory Defaults
Use this screen to restore the WiMAX Device to its factory default settings.
Click Maintenance > Backup/Restore > Factory Defaults to open this screen
as shown next.
Figure 95 Factory Defaults Screen
This screen contains the following fields:
12.17 Log Setting
Use this screen to configure which type of events on the WiMAX Device are
logged.
Click Maintenance > LOG > Log Setting to open this screen as shown next.
Figure 96 Log Setting Screen
This screen contains the following fields:
Table 76 Factory Defaults
LABEL DESCRIPTION
Reset Click this to clear all user-entered configuration information and return
the MAX208M2W Series to its factory defaults. There is no warning
screen.
Table 77 Log Setting
LABEL DESCRIPTION
Enable Log Select this to have the MAX208M2W Series log network activity
according to the selected Log Level.
Log Level Select the type of logs to record.