ZyXEL Communications MAX218M2W, User Manual

Page: 174 / 306

Chapter 12 Maintenance
MAX208M2W Series User’s Guide
170
12.7 CWMP
Use this screen to allow CWMP connections for remote management, firmware
upgrades and troubleshooting.
Click Maintenance > Remote MGMT > CWMP to open this screen as shown
next.
Figure 86 CWMP Screen
This screen contains the following fields:
Trap Server Enter the IP address of the station to send your SNMP traps to.
Trap
Community Enter the trap community, which is the password sent with each trap to
the SNMP manager. The default is public and allows all requests.
Table 66 SNMP (continued)
LABEL DESCRIPTION
Table 67 CWMP
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
ACS Server URL Enter the URL or IP address of the auto-configuration server.
Bootstrap
Enable
Select this to enable bootstrap events.
ACS Username Enter the user name sent when the MAX208M2W Series connects to the
ACS and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.