ZyXEL Communications MAX-306, User Manual, Page: 254 / 405

Chapter 21 The Status Screen
User’s Guide
254
The following tables describe the labels in this screen.
Table 113 Status
LABEL DESCRIPTION
Refresh Interval Select how often you want the WiMAX Device to update this screen.
Refresh Now
Click this to update this screen immediately.
Device Information
System Name
This field displays the WiMAX Device system name. It is used for
identification.
You can change this in the ADVANCED > System Configuration >
General screen’s System Name field.
Firmware
Version This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created.
You can change the firmware version by uploading new firmware in
ADVANCED > System Configuration > Firmware.
WAN Information
IP Address
This field displays the current IP address of the WiMAX Device in the
WAN.
IP Subnet Mask This field displays the current subnet mask on the WAN.
DHCP
This field displays what DHCP services the WiMAX Device is using in the
WAN. Choices are:
Client - The WiMAX Device is a DHCP client in the WAN. Its IP
address comes from a DHCP server on the WAN.
None - The WiMAX Device is not using any DHCP services in the
WAN. It has a static IP address.
LAN Information
IP Address
This field displays the current IP address of the WiMAX Device in the
LAN.
IP Subnet Mask This field displays the current subnet mask in the LAN.
DHCP
This field displays what DHCP services the WiMAX Device is providing to
the LAN. Choices are:
Server - The WiMAX Device is a DHCP server in the LAN. It assigns
IP addresses to other computers in the LAN.
Relay - The WiMAX Device is routing DHCP requests to one or more
DHCP servers. The DHCP server(s) may be on another network.
None - The WiMAX Device is not providing any DHCP services to the
LAN.
You can change this in ADVANCED > LAN Configuration > DHCP
Setup.
WiMAX Information
Operator ID
Every WiMAX service provider has a unique Operator ID number, which
is broadcast by each base station it owns. You can only connect to the
Internet through base stations belonging to your service provider’s
network.
BSID This field displays the identification number of the wireless base station
to which the WiMAX Device is connected. Every base station transmits a
unique BSID, which identifies it across the network.