ZyXEL Communications MAX-306, User Manual, Page: 219 / 405

Chapter 18 The Remote Management Screens
User’s Guide
219
SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the
TCP/IP protocol suite. Your WiMAX Device supports SNMP agent functionality,
which allows a manager station to manage and monitor the WiMAX Device
through the network. The WiMAX Device supports SNMP version one (SNMPv1)
and version two (SNMPv2). The next figure illustrates an SNMP management
operation.
Note: SNMP is only available if TCP/IP is configured.
18.2 WWW
Click TOOLS > Remote Management > WWW to control HTTP access to your
WiMAX Device.
Figure 100 TOOLS > Remote Management > WWW
The following table describes the labels in this screen.
Table 84 TOOLS > Remote Management > WWW
LABEL DESCRIPTION
Server Port Enter the port number this service can use to access the WiMAX Device.
The computer must use the same port number.
Server Access Select the interface(s) through which a computer may access the
WiMAX Device using this service.
Secured Client
IP Address Select All to allow any computer to access the WiMAX Device using this
service.
Select Selected to only allow the computer with the IP address that
you specify to access the WiMAX Device using this service.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.