ZyXEL Communications MAX-306, User Manual, Page: 139 / 405

Chapter 11 The System Configuration Screens
User’s Guide
139
Click ADVANCED > System Configuration > Dynamic DNS to set up the
WiMAX Device as a dynamic DNS client.
Figure 65 ADVANCED > System Configuration > Dynamic DNS
The following table describes the labels in this screen.
Table 52 ADVANCED > System Configuration > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Enable Dynamic
DNS
Select this to use dynamic DNS.
Service
Provider Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type Select the type of service that you are registered for from your Dynamic
DNS service provider.
Host Name Enter the host name. You can specify up to two host names, separated
by a comma (",").
User Name Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard
Option Select this to enable the DynDNS Wildcard feature.