manualshive.com logo in svg

ZyXEL Communications MAX-306, User Manual, Page: 123 / 405

Share
Download
ZyXEL Communications MAX-306 User Manual Download Page 123

 Chapter 9 The VPN Transport Screens

User’s Guide

123

9.4.1  Ethernet Pseudowire Setup

Click a pseudowire entry’s Edit icon in the ADVANCED > VPN Transport > 
Ethernet Pseudowire screen to set up or modify an Ethernet pseudowire’s 
configuration.

Figure 55   

ADVANCED > VPN Transport > Ethernet Pseudowire Setup  

The following table describes the labels in this screen.

Table 43   

ADVANCED > VPN Transport > Ethernet Pseudowire Setup

LABEL

DESCRIPTION

Active

Select this to enable the pseudowire. Deselect it to disable the 
pseudowire.

MPLS VC Label

Ingress

Enter the VC ingress label number for this pseudowire. This must 
be the egress label number of the peer device. This should not 
be the ingress label number of any other Ethernet pseudowire 
configured on the WiMAX Device.

Egress

Enter the egress label number for this pseudowire. This must be 
the ingress label of the peer device. This should not be the 
egress label number of any other Ethernet pseudowire 
configured on the WiMAX Device.

Pseudowire 
Description

Enter a brief (up to 31 characters) description for this 
pseudowire.

Apply

Click to save your changes.

Cancel

Click to return to the previous screen without saving your 
changes.

Summary of Contents for MAX-306






















































































































































































































































































































































































































Reviews:

No comments