manualshive.com logo in svg

ZyXEL Communications MAX-207HW2, User Manual

Share
Download
ZyXEL Communications MAX-207HW2 User Manual Download Page 50

 Chapter 5 The LAN Configuration Screens

User’s Guide

51

5.5  IP Static Route

Click ADVANCED > LAN Configuration > IP Static Route to look at the static 
routes configured in the WiMAX Modem.

Note: The first static route is the default route and cannot be modified or deleted.

Figure 15   

Advanced> LAN Configuration > IP Static Route

The following table describes the icons in this screen.

The following table describes the labels in this screen. 

Table 13   

Advanced> LAN Configuration > IP Static Route

ICON

DESCRIPTION

Edit

Click to edit this item.
Delete

Click to delete this item.

Table 14   

Advanced> LAN Configuration > IP Static Route

LABEL

DESCRIPTION

#

The number of the item in this list.

Name

This field displays the name that describes the static route.

Active

This field shows whether this static route is active (Yes) or not (No).

Destination

This field displays the destination IP address(es) that this static route 
affects.

Gateway

This field displays the IP address of the gateway to which the WiMAX 
Modem should send packets for the specified Destination. The 
gateway is a router or a switch on the same network segment as the 
device's LAN or WAN port. The gateway helps forward packets to their 
destinations.

Apply

Click to save your changes.

Reset

Click to restore your previously saved settings.

Summary of Contents for MAX-207HW2





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands