manualshive.com logo in svg

ZyXEL Communications MAX-207HW2, User Manual

Share
Download
ZyXEL Communications MAX-207HW2 User Manual Download Page 24

 Chapter 2 Introducing the Web Configurator

User’s Guide

25

2.2  The Main Screen

When you first log into the web configurator and by-pass the wizard, the Main 
screen appears. Here you can view a concise summary of your WiMAX Modem 
connection status. This is also the default “home” page for the ZyXEL web 
configurator and it contains conveniently-placed shortcuts to all of the other 
screens.

Note: Some features in the web configurator may not be available depending on your 

firmware version and/or configuration.

Figure 7   

Main Screen

 ( 首頁 )

The following table describes the icons in this screen.

Table 3   

Main 

( 首頁 ) 

> Icons

ICON

DESCRIPTION

MAIN

 

(

首頁

)

Click to return to the Main screen.

SETUP

 

(

設定

)

Click to go the Setup screen, where you can configure LAN, 
DHCP and WAN settings.

ADVANCED 

(

進階

)

Click to go to the Advanced screen, where you can configure 
features like Port Forwarding and Triggering, SNTP and so on.

Summary of Contents for MAX-207HW2





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands