ZyXEL Communications MAX-200M1 Series, User Manual

Page: 67 / 258

ZyXEL MAX-200M1 Series User’s Guide
Chapter 6 Status Screens 67
Figure 34 Packet Statistics
The following table describes the fields in this screen.
6.6 DHCP Table Screen
This screen displays information about computers that received an IP address from the ZyXEL
Device. To access this screen, open the
Status screen (see Section 6.1 on page 59 ), and click
(Details...) next to DHCP Table .
Table 10 Packet Statistics
LABEL DESCRIPTION
Packet Statistics
Port This column displays each interface of the ZyXEL Device.
Status This field indicates whether or not the ZyXEL Device is using the interface.
For the WAN interface, this field displays
Up when the ZyXEL Device is
connected to a WiMAX network, and Down when the ZyXEL Device is not
connected to a WiMAX network.
For the LAN interface, this field displays
Up when the ZyXEL Device is using the
interface and Down when the ZyXEL Device is not using the interface.
TxPkts This field displays the number of packets transmitted on this interface.
RxPkts This field displays the number of packets received on this interface.
Collisions This field displays the number of collisions on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this interface has been connected.
System up Time This is the elapsed time the system has been on.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Stop Click this button to halt the refreshing of the system statistics.