ZyXEL Communications MAX-200M1 Series, User Manual

Page: 55 / 258

ZyXEL MAX-200M1 Series User’s Guide
Chapter 5 VoIP Wizard 55
C
H A P T E R
5
VoIP Wizard
This chapter shows you how to use the wizard to set up your SIP account(s).
5.1 Introduction
The ZyXEL Device has Voice over IP (VoIP) communication capabilities that allow you to use
a traditional analog telephone to make Internet calls. You can configure the ZyXEL Device to
use up to two SIP based VoIP accounts.
5.2 VOIP Wizard Setup
1 After you enter the password to access the web configurator, select Go to Wizard setup .
Otherwise, click the wizard icon ( ) in the top right corner of the web configurator to
display the wizard main screen. Click VOIP SETUP to configure the system for Voice
Over Internet connection.
Figure 25 Select a Mode
2 The following screen displays. This wizard screen allows you to configure your voice
settings for SIP account 1. Fill in the fields with information from your VoIP service
provider. Leave the default settings in fields for which no information was provided
(except if otherwise specified). See
Chapter 10 on page 105 for background information
on these fields.