ZyXEL Communications MAX-200M1 Series, User Manual

Page: 46 / 258

ZyXEL MAX-200M1 Series User’s Guide
46 Chapter 3 Tutorial
2 In the Outgoing Call Use area, select SIP1 .
3 In the Incoming Call apply to area, select both SIP1 and SIP2 .
4 Click Apply . Your analog phone settings are saved.
3.2.3 Set Up Speed Dialing and Make a Call
In this example you want to set up speed dialling to make calls to a friend, Bob, whose SIP
account number is 2345@xyzvoip.com. Your voIP provider, abcvoip.com, has told you that to
call an xyzvoip.com number you must add ‘555’ at its start.
Note: Different VoIP providers implement calls to other networks in different ways.
Check with your provider for details.
To configure speed dialling on the ZyXEL Device, click VoIP > Phone Book > Speed Dial .
The following screen displays.
Figure 14 Tutorial: the Speed Dial Screen
Use the following steps to set up a speed dial entry.
1 You can have up to ten speed dial rules. Select the rule number ( 1 , in this example) from
the Speed Dial drop-down list box.
2 In the Number field, enter “5552345” and in the Name field enter “Bob”. Under Type ,
select Use Proxy and click Add .
The new speed dial rule is displayed in the Speed Dial Phone book List .