ZyXEL Communications MAX-200M1 Series, User Manual

Page: 41 / 258

ZyXEL MAX-200M1 Series User’s Guide
Chapter 3 Tutorial 41
C
H A P T E R
3
Tutorial
This chapter provides examples showing how to use the ZyXEL Device to access the Internet,
set up VoIP and make a telephone call over the Internet using the ZyXEL Device’s speed dial
feature.
3.1 Connect to the Internet
This section shows how to set up your Internet access details on the ZyXEL Device and
configure your WiMAX frequency settings. See
Section 7.2 on page 71 for more information
on how WiMAX works.
3.1.1 Configure Internet Access Settings
To access the Internet, you need information from your Internet Service Provider (ISP) about
your account and the network. In this example, your user name is ‘User1234’ and your
password is ‘4321’.
Your ISP has also told you that you will be assigned a dynamic IP address each time you
connect to the Internet. See
Section 7.3 on page 72 for more details about dynamic and static
IP addresses.
Once you have connected the ZyXEL Device to your computer and accessed the Web
Configurator (see the Quick Start Guide for details) follow the steps below to connect to a
network.
1
In the Web Configurator, click Network > WAN in the navigation panel.
Figure 9 Tutorial: Navigation Panel