Chapter 7 Wireless LAN
LTE5366 Series User’s Guide
74
Figure 40
Network > Wireless LAN > General: WPA2-PSK
The following table describes the labels in this screen.
Table 22 Network > Wireless LAN > General: WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select
WPA2-PSK
to enable data encryption.
Encryption
Select the encryption type of data encryption.
Select
AES
if your wireless clients can all use
AES.
Select
TKIP / AES
to allow the wireless clients to use either
TKIP
or
AES
.
Pre-Shared Key
WPA2-PSK
uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key Update
Timer
The
Group Key Update Timer
is the rate at which the AP sends a new group key out to all
clients.
The default is
3600
seconds (60 minutes).
Apply
Click
Apply
to save your changes back to the LTE5366.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
