Chapter 5 Monitor
LTE5366 Series User’s Guide
48
5.4 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the LTE5366’s LAN as a DHCP server or
disable it. When configured as a server, the LTE5366 provides the TCP/IP configuration for the clients. If
DHCP service is disabled, you must have another DHCP server on that network, or else the computer
must be manually configured.
Click
Monitor > DHCP Table
or
Configuration > Network > DHCP Server > Client List
. Read-only information
here relates to your DHCP status. The DHCP table shows current DHCP client information (including
MAC
Address
, and
IP Address
) of all network clients using the LTE5366’s DHCP server.
Figure 25
Configuration > Monitor > DHCP Table
The following table describes the labels in this screen.
5.5 ARP Table
Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
Table 10 Confiiguration > Monitor > DHCP Table
LABEL
DESCRIPTION
#
This is the index number of the host computer.
Status
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
Host Name
This field displays the computer host name.
IP Address
This field displays the IP address relative to the # field listed above.
MAC Address
This field shows the MAC address of the computer with the name in the
Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve
Select this if you want to reserve the IP address for this specific MAC address.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Apply
Click
Apply
to save your changes back to the LTE5366.
