ZyXEL Communications LTE5366 Series, User Manual

Page: 171 / 228

Chapter 25 Troubleshooting
LTE5366 Series User’s Guide
171
5
Reset the device to its factory defaults, and try to access the LTE5366 with the default IP address. See
Section 1.5 on page 15 .
6
If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.
Advanced Suggestions
• Try to access the LTE5366 using another service, such as Telnet. If you can access the LTE5366, check
the firewall rules to find out why the LTE5366 does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a computer that is
connected to a LAN / ETHERNET port.
I can see the Login screen, but I cannot log in to the LTE5366.
1
Make sure you have entered the user name and password correctly. The default user name is admin
and the default password is 1234 . This field is case-sensitive, so make sure [Caps Lock] is not on.
2
This can happen when you fail to log out properly from your last session. Try logging in again after 5
minutes.
3
Disconnect and re-connect the power adaptor or cord to the LTE5366.
4
If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page 15 .
25.4 Internet Access
I cannot access the Internet.
1
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.
2
Make sure your mobile access information (such as APN) is entered correctly in the wizard or the WAN
screen. These fields are case-sensitive, so make sure [Caps Lock] is not on.
3
Make sure your SIM card’s account is valid and has an active data plan. Check your service contract or
contact your service provider directly.
4
If the problem continues, contact your ISP.
I cannot access the Internet anymore. I had access to the Internet (with the LTE5366), but my
Internet connection is not available anymore.