Chapter 24 Maintenance
LTE5366 Series User’s Guide
167
Figure 114
Maintenance > Backup/Restore
The following table describes the labels in this screen.
Note: If you uploaded the default configuration file you may need to change the IP address
of your computer to be in the same subnet as that of the default LTE5366 IP address
(192.168.1.1). See
for details on how to set up your computer’s
IP address.
Table 75 Maintenance > Backup/Restore
LABEL
DESCRIPTION
Backup Configuration
Backup
Click
Backup
to save the LTE5366’s current configuration to your computer.
Restore Configuration
File Path
Type in the location of the file you want to upload in this field or click
Browse...
to find it.
Choose File
Click
Browse...
to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload
Click
Upload
to begin the upload process.
Note: Do not turn off the LTE5366 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute
before logging into the LTE5366 again. The LTE5366 automatically restarts in this time causing a
temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Back to Factory Defaults
Reset
Pressing the
Reset
button in this section clears all user-entered configuration information and
returns the LTE5366 to its factory defaults.
You can also press the
RESET
button on the rear panel to reset the factory defaults of your
LTE5366. Refer to the chapter about introducing the Web Configurator for more information on
the
RESET
button.
