LTE5366 Series User’s Guide
107
C
HAPTER
13
Interface Group
13.1 Overview
By default, the four LAN interfaces on the LTE5366 are in the same group and can communicate with
each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).
13.2 Interface Group Screen
You can manually add a LAN/WLAN interface to a new group.
Use the
DHCP
screen to configure the private IP addresses the DHCP server on the LTE5366 assigns to the
clients in the default and/or user-defined groups. See
for more information.
Use the
Interface Group
screen to create a new interface group, which is a new LAN bridge interface
(subnet). Click
Network > Interface Group
to open the following screen.
Figure 70
Network > Interface Group
The following table describes the fields in this screen.
13.2.1 Interface Group > Add Screen
Click the
Add
button in the
Interface Group
screen to open the following screen. Use this screen to
create a new interface group.
Table 46 Network > Interface Group
LABEL
DESCRIPTION
Add
Click this button to create a new interface group.
Name
This shows the descriptive name of the group.
LAN Interface
This shows the interface group.
VID
This shows the VLAN ID number (from 0 to 4094) of the interface group.
Delete
Click the
Delete
icon to remove the user-defined group.
