LTE5366 Series User’s Guide
104
C
HAPTER
12
Routing
12.1 Overview
This chapter shows you how to configure static routes for your LTE5366.
The LTE5366 usually uses the default gateway to route outbound traffic from computers on the LAN to
the Internet. To have the LTE5366 send data to devices not reachable through the default gateway, use
static routes.
For example, the next figure shows a computer (
A
) connected to the LTE5366’s LAN interface. The
LTE5366 routes most traffic from
A
to the Internet through the LTE5366’s default gateway (
R1
). You create
one static route to connect to services offered by your ISP behind router
R2
. You create another static
route to communicate with a separate network behind a router
R3
connected to the LAN.
Figure 66
Example of Static Routing Topology
12.2 Static Route Screen
Click
Network > Routing > Static Route
to open the
Static Route
screen.
