ZyXEL Communications LTE5121, User Manual

Page: 38 / 234

Chapter 4 Broadband
LTE-5121 User’s Guide
38
4.2.1 Edit Internet Connection
In Network Setting > Broadband, click Add New WAN Interface the Edit icon next to the LTE
connection to display the following screen. Use this screen to configure a WAN connection.
Figure 18
Broadband Edit
The following table describes the fields in this screen.
Table 4
Broadband Edit
LABEL DESCRIPTION
Name Specify the name for this WAN interface.
Type Select LTE for an LTE WAN interface.
APN Enter the Access Point Name (APN) of an LTE network, which your service provider gave you.
Dial String Enter the dial string for the ISP.
MTU
The Maximum Transmission Unit (MTU) defines the size of the largest packet allowed on an
interface or connection. Enter the MTU for this WAN interface in this field.
NAT Enable Select this to activate NAT on this WAN interface.
Apply as
Default
Gateway Select this option to have the LTE Device use the WAN interface of this connection as the
system default gateway.
DNS Server Select Obtain DNS info Automatically to have the LTE Device get the DNS server addresses
from the ISP automatically.
Select Use the following Static DNS IP Address to have the LTE Device use the DNS
server addresses you configure manually.