ZyXEL Communications LTE5121, User Manual

Page: 200 / 234

Chapter 20 Remote MGMT
LTE-5121 User’s Guide
200
20.2 The Remote MGMT Screen
Use this screen to decide what services you may use to access which LTE Device interface. Click
Maintenance > Remote MGMT to open the following screen.
Figure 131
Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 88
Maintenance > Remote MGMT
LABEL DESCRIPTION
Services This is the service you may use to access the LTE Device.
LAN/WLAN Select the Enable check box for the corresponding services that you want to
allow access to the LTE Device from the LAN and WLAN.
WAN Select the Enable check box for the corresponding services that you want to
allow access to the LTE Device from the WAN.
Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.