ZyXEL Communications LTE3316-M604, User Manual

Page: 78 / 193

Chapter 8 Wireless LAN
LTE3316 Series User’s Guide
78
8.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The
following screen displays.
Figure 33 Configuration > Network > Wireless LAN > More AP: Edit
The following table describes the labels in this screen.
SSID An SSID profile is the set of parameters relating to one of the Zyxel Device’s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
Security This field indicates the security mode of the SSID profile.
Edit Click the Edit icon to configure the SSID profile.
Table 21 Configuration > Network > Wireless LAN > More AP (continued)
LABEL DESCRIPTION
Table 22 Configuration > Network > Wireless LAN > More AP: Edit
LABEL DESCRIPTION
Active Select this to activate the SSID profile.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated.
Enter a descriptive name (up to 32 printable characters found on a typical English language
keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.