ZyXEL Communications LTE3301-PLUS User Manual Download Page 282

Page: 282 / 361

Chapter 29 Remote Management

Nebula Mobile Router User’s Guide

282

29.7 Add Trust Domain

Use this screen to add a public IP address or a complete domain name of a device which is allowed to
access the Zyxel Device.

Click the

Add Trust Domain

button in the

Maintenance

Remote Management

Trust Domain for IP Passthrough

screen to open the following screen.

Figure 186

Maintenance > Remote Management > Trust Domain for IP Passthrough > Add Trust Domain

The following table describes the fields in this screen.

Table 125 Maintenance > Remote Management > Trust Domain for IP Passthrough > Add Trust Domain

LABEL

DESCRIPTION

IP Address

Enter a public IPv4/IPv6 IP address which is allowed to access the service on the Zyxel
Device from the WAN.

Cancel

Click

Cancel

to restore your previously saved settings.

Click

to save your changes back to the Zyxel Device.

Summary of Contents for LTE3301-PLUS










































































































































































































































































































































































Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands

ZyXEL Communications LTE3301-PLUS, User Manual

Search results

Summary of Contents for LTE3301-PLUS

Reviews:

Related manuals for LTE3301-PLUS

Brands by name

Popular brands