Chapter 29 Remote Management
Nebula Mobile Router User’s Guide
280
Figure 183
Maintenance > Remote Management > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
29.5 MGMT Services for IP Passthrough
Configure which interfaces you can use to access the Zyxel Device in
IP Passthrough
mode for a given
service. You can also specify the service port numbers computers must use to connect to the Zyxel
Device. IP Passthrough allows Internet traffic to go to a LAN computer behind the Zyxel Device without
going through NAT. Make sure to enable IP Passthrough in
Network Setting
>
Broadband
>
Cellular IP
Passthrough
.
Click
Maintenance
>
Remote Management
>
MGMT Services for IP Passthrough
to open the following
screen.
Figure 184
Maintenance > Remote Management > MGMT Services for IP Passthrough
Table 122 Maintenance > Remote Management > Trust Domain > Add Trust Domain
LABEL
DESCRIPTION
IP Address
Enter a public IPv4/IPv6 IP address which is allowed to access the service on the
Zyxel Device from the WAN.
OK
Click
OK
to save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to restore your previously saved settings.
Summary of Contents for LTE3301-PLUS
