Chapter 9 Home Networking
Nebula Mobile Router User’s Guide
171
9.4 UPnP
Universal Plug and Play (UPnP) is an open networking standard that uses TCP/IP for simple peer-to-peer
network connectivity between networking devices or software applications which have UPnP enabled.
A UPnP device can dynamically join a network, obtain an IP address, advertise its services, and learn
about other devices on the network. A device can also leave a network automatically when it is no
longer in use.
See
Note: To use
UPnP NAT-T
, enable
NAT
in the
Network Setting
>
Broadband
>
Edit
or
Add New
WAN Interface
screen.
Use the following screen to configure the UPnP settings on your Zyxel Device. Click
Network Setting
>
Home Networking
>
UPnP
to display the screen shown next.
Figure 103
Network Setting > Home Networking > UPnP
IP Address
Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify if you select
Manual Input
in the previous field.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 59 Network Setting > Home Networking > Static DHCP: Static DHCP Configuration (continued)
LABEL
DESCRIPTION
Summary of Contents for LTE3301-PLUS
