Chapter 8 Wireless
Nebula Mobile Router User’s Guide
141
8.4 MAC Authentication
Use this screen to give exclusive access to specific devices
(Allow)
or exclude specific devices from
accessing the Zyxel Device
(Deny),
based on the MAC address of each device. Every Ethernet device
has a unique factory-assigned MAC (Media Access Control) address, which consists of six pairs of
hexadecimal characters, for example: 00:A0:C5:00:00:02. You need to know the MAC addresses of the
device you want to allow/deny to configure this screen.
Note: You can have up to 25 MAC authentication rules.
Use this screen to view your Zyxel Device’s MAC filter settings and add new MAC filter rules. Click
Network Setting
>
Wireless
>
MAC Authentication
. The screen appears as shown.
Figure 84
Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Encryption
Select the encryption type (
AES
or
TKIP+AES
) for data encryption.
Select
AES
if your WiFi clients can all use AES.
Select
TKIP+AES
to allow the WiFi clients to use either TKIP or AES.
Not all models support the
TKIP+AES
option.
Timer
The
Timer
is the rate at which the RADIUS
server sends a new group key out to all clients.
Cancel
Click
Cancel
to exit this screen without saving.
OK
Click
OK
to save your changes.
Table 48 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL
DESCRIPTION
Table 49 Network Setting > Wireless > MAC Authentication
LABEL
DESCRIPTION
General
SSID
Select the SSID for which you want to configure MAC filter settings.
Summary of Contents for LTE3301-PLUS
