Chapter 4 Tutorials
LTE3301-M209 User’s Guide
35
Note: Your Zyxel Device has a WPS button located on its panel, as well as a WPS button in its
configuration utility. Both buttons have exactly the same function; you can use one or
the other.
Note: It doesn’t matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The Zyxel Device sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the Zyxel Device securely.
The following figure shows you an example to set up wireless network and security by pressing a button
on both Zyxel Device and wireless client (the NWD210N in this example).
Figure 20
Example WPS Process: PBC Method
4.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both Zyxel Device’s configuration
interface and the client’s utilities.
1
Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method to
get a PIN number.
2
Enter the PIN number to the
PIN
field in the
Configuration > Network > Wireless LAN > WPS Station
screen
on the Zyxel Device.
3
Click
Start
buttons (or button next to the PIN field) on both the wireless client utility screen and the Zyxel
Device’s
WPS Station
screen within two minutes.