ZyXEL Communications LTE3202-M430, User Manual, Page: 91 / 117

Chapter 14 System
LTE3202-M430 User’s Guide
91
14.4 The Time Settings Screen
For effective scheduling and logging, the LTE3202-M430 system time must be accurate. The LTE3202-
M430 has a software mechanism to get the current time and date from an external server. To change
your LTE3202-M430’s time zone, click
Maintenance > Time Settings . The screen displays as shown. You
can have the LTE3202-M430 get the date and time from a time server or change the IP address or URL of
your time server.
Figure 68 Maintenance > Time Settings
The following table describes the labels in this screen.
Table 48 Maintenance > Time Settings
LABEL DESCRIPTION
Time Settings
Current date and
time This field displays the present time and date of your LTE3202-M430.
NTP Mode Select set manually to enter the time and date manually. If you configure a new time and
date, Time Zone and Daylight Saving at the same time, the new time and date you entered
has priority and the Time Zone and Daylight Saving settings do not affect it.
Select sync from network to have the LTE3202-M430 get the time and date from the time
server you specified below.
Primary/Secondary
NTP server Enter the IP address or URL of your time server. Check with your ISP/network administrator if
you are unsure of this information.