Chapter 8 WLAN
LTE2566-M634 User’s Guide
70
Note: To use the WPS feature, make sure you have wireless enabled in the
Configuration >
Network > Wireless LAN
>
WPS SetUp
screen.
Note: If you want to use the WPS feature set the security type to
WPA Personal
.
Click
Configuration > Network > Wireless LAN > WPS SetUp
. The following screen displays.
Figure 49
Configuration > Network >Wireless LAN > WPS SetUp
The following table describes the labels in this screen.
8.8 WPS Station
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Configuration > Network
>
Wireless LAN
>
WPS Station
tab.
Note: After you click
Push Button
on this screen, you have to press a similar button in the
wireless station utility within 2 minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station again after the first 2
minutes.
Table 25 Configuration > Network >Wireless LAN > WPS SetUp
LABEL
DESCRIPTION
PIN Code
Click
Enable
to activate WPS on the LTE2566-M634.
PIN Number
This field is available only when you set
PIN Code
to
Enable
.
Select this option and enter the PIN of the device that you are setting up a WPS connection with
and click
Apply
to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device’s settings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the LTE2566-M634.