ZyXEL Communications IES4005M, User Manual

Page: 73 / 236

Chapter 9 The CLI
IES4005M User’s Guide
73
9.6.1 Command Example
This example creates a user account tom with a password of 0123. The privilege level is set to 5.
Then it displays all user accounts on your IES.
This example sets the password of enable mode to ies7 and enable local database for user
authentication. The administrator logs out and then logs in to a user account (for example, tom)
for testing whether the enable password works.
password < password >
Changes the enable password of the highest privilege (enable) mode.
password
: Up to 31 printable characters.
C 14
password < password > privilege
< privilege >
Sets the enable password of the specified privilege (enable) mode.
Each command has a privilege level. A user can only use commands
with privilege levels equal to or lower than his current privilege
(enable) mode.
password
: Up to 31 printable characters.
privilege
: 1 - 14
C 14
no password privilege
< privilege >
Removes the privilege (enable) mode password setting for the specified
privilege level.
privilege
: 1 - 14
C 14
Table 54
Login Account and Password Commands Summary (continued)
COMMAND DESCRIPTION M P
ras# config
ras(config)# logins username tom password 0123
ras(config)# logins username tom privilege 5
ras(config)# exit
ras# show logins
index status name privilege
----- ------ ------------------------------- ---------
1 V admin 14
2 V tom 5
ras#
ras# config
ras(config)# password ies7
ras(config)# aaa authentication enable local
ras(config)# exit
ras# exit
User name: tom
Password: ****
ras# enable
Password:
ras#