manualshive.com logo in svg

ZyXEL Communications IES-1248-51V, Support Notes, Page: 82 / 90

Share
Download
ZyXEL Communications IES-1248-51V Support Notes Download Page 82

 

 

IES-1248-51V Support Notes 

 

 

81

  Cascade two IES-1248-51V (Daisy chain mode) 

You know, the IES-1248-51V is a remote mini-DSLAM. When the subscriber number 

is increased, ISPs may cascade or daisy-chain the more then one IES-1248-51V to 

extend the port number. They can daisy-chain up to three IES-1248-51V.   

 

MDF 

MDF 

ISP/Central office 

Internet 

IES-1248-51V 

 

IES-1248-51V (Daisy-chain mode) 

How to setup Daisy-chain mode 

In this case, we daisy-chain two IES-1248-51V. Please see the figure above. We only 

set the one connected to the ISP as Daisy-Chain mode. In Daisy-Chain mode, connect 

the Ethernet Port 1 to the Ethernet backbone and connect the Ethernet Port 2 to 

another IES-1248-51V. Note that we don’t suggest using loop network topology while 

using daisy-chain mode. 

 

1. IES-1248-51V settings 

Click 

Basic Setting

, 

Switch setup 

in the navigation panel to display configuration 

screen as shown. You will see the 

Switch setup 

page. In 

Switch Mode

 combobox, 

select the 

Daisy chain

. Don’t forget press

 Apply

 button to let the setting take effect.

 

 

All contents copyright (c) 2007 ZyXEL Communications Corporation.   

Summary of Contents for IES-1248-51V



























































































Reviews:

No comments