NetAtlas IES-1000 (AAM1008) EMS User’s Guide
The Configuration Menus
7-21
Figure 7-17 Configuration: ADSL: Virtual Channel Configuration
The following table describes the labels in this screen.
Table 7-15 Configuration: ADSL: Virtual Channel Configuration
LABEL DESCRIPTION
Port-VPI-
VIC
This field displays the type and number of a port, the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI).
PVID
This field displays the PVID (Port VLAN ID) assigned to untagged frames received on this channel.
One port can have only one super channel.
For a super channel, this field does not display the PVID number.
Priority
This field displays the priority value (0 to 7) to add to incoming frames without a (IEEE802.1p)
priority tag.
For a super channel port, this field does not display the priority level.
VC Profile
This field displays the name of the virtual channel profile assigned to this port.
New Click
New
to create a new virtual channel on a port.
Modify Click
Modify
to change the virtual channel settings of a selected port.
Delete Click
Delete
to remove the virtual channel setting from a selected port.
Mapping Click
Mapping
to associate a virtual channel profile to a port in the
Mapping
screen.
Sorting Click
Sorting
to order the entries based on the selected column in the
Sorting
screen.
Cancel Click
Cancel
to close this screen.
7.5.2 Virtual
Channel
Setup
To configure a virtual channel on a port, click
New
in the
Virtual Channel Configuration
screen to display the
screen as shown.