ZyXEL Communications IES-1000 - ANNEXE 7, User Manual, Page: 72 / 139

NetAtlas IES-1000 (AAM1008) EMS User’s Guide
7-14 The Configuration Menus
7.4.2 IP Address Table
Click Configuration , Network Configuration and then IP Address Table .
Figure 7-11 Configuration: Network Configuration: IP Address Table
The following table describes the labels in this screen.
Table 7-9 Configuration: Network Configuration: IP Address Table
LABEL DESCRIPTION
Addr This is the IP address of the device.
IfIndex This is the index value that uniquely identifies the interface to which this entry is applicable.
The interface identified by a particular value of this index is the same interface as identified by
the same value of ifIndex.
NetMask This is the subnet mask associated with the IP address of this entry. The value of the mask is
an IP address with all the network bits set to 1 and all the hosts’ bits set to 0.
BcastAddr This is the value of the least-significant bit in the IP broadcast address used for sending
datagrams on the (logical) interface associated with the IP address of this entry. For example,
when the Internet standard all-ones broadcast address is used, the value will be 1. This value
applies to both the subnet and network broadcasts addresses used by the device on this
(logical) interface.
ReasmMaxSize This is the size of the largest IP datagram, which this device can reassemble from incoming
fragmented IP datagrams received on this interface.
For information on editing a table entry, please see Section 5.1.1 .
7.4.3 IP Routing Table
Click Configuration , Network Configuration and then IP Routing Table .
Figure 7-12 Configuration: Network Configuration: IP Routing Table