NetAtlas IES-1000 (AAM1008) EMS User’s Guide
6-6
The System Menus
Figure 6-8 System: DHCP Setup
The following table describes the labels in this screen.
Table 6-2 System: DHCP Setup
LABEL DESCRIPTION
DHCP Relay
Service
Configure the fields below to set the DHCP relay settings.
Relay Select
Yes
to enable DHCP relay. Otherwise, select
No
to disable this feature.
Relay Option82
You cannot leave this field blank.
Enable DHCP relay info to have the IES add the originating slot and port numbers to client
TCP/IP configuration requests that it relays to a DHCP server.
Relay Option82
Info
Use this field to specify up to 24 ASCII characters of additional information for the IES to add to
the DHCP client TCP/IP configuration requests that it relays to a DHCP server.
An example would be the chassis number of the IES or the ISP’s name.
Apply Click
Apply
to save the changes.
DHCP Server
This table displays the IP address(es) and status of the DHCP servers.
You can configure up to three DHCP servers.
Server IP
Address
This field displays the IP address(es) of the DHCP server(s) to which the IES should relay
DHCP client TCP/IP configuration requests.
Active This field shows whether a DHCP server is enabled (
Yes
) or not (
No
).
New Click
New
to add a new DHCP server entry in the
Create a DHCP Server
screen.
Delete Click
Delete
to remove the selected DHCP server entry.
Close
Click
Close
to close this screen.