NetAtlas IES-1000 (AAM1008) EMS User’s Guide
Introducing the SNMPc Network Manager
2-1
Chapter 2
Introducing the SNMPc Network Manager
This chapter gives a brief overview of the SNMPc Network Manager.
2.1 Starting the SNMPc Network Manager
You must have SNMPc properly installed before you can use the EMS; please refer to the Castle Rock web site at
www.castlerock.com or see your SNMPc user's guide.
You may start the SNMPc Network Manager manually or automatically each time you turn on your computer.
2.1.1 Manual
Startup
Click
Start
,
Programs
,
SNMPc
,
Startup System
to manually start the SNMPc network manager. This is the
default location of the SNMPc network manager.
2.1.2 Automatic
Startup
To automatically start the SNMPc network manager each time you turn on your computer:
In SNMPc main window, click
Config
,
System Startup
.
Select the
Auto Startup
check box and click
Done
.
Figure 2-1 Automatic Startup