manualshive.com logo in svg

ZyXEL Communications IES-1000 - ANNEXE 7, User Manual, Page: 121 / 139

Share
Download
ZyXEL Communications IES-1000 - ANNEXE 7 User Manual Download Page 121

NetAtlas IES-1000 (AAM1008) EMS User’s Guide 

The Performance Protocol Menus 

9-7 

 

Figure 9-5 SNMP List Statistics 

The following table describes the fields in this screen. 

Table 9-3 SNMP List Statistics 

FIELD 

DESCRIPTION 

EnableAuthenTraps 

This field indicates whether the SNMP agent process is permitted to generate 
authentication-failure traps. The value of this object overrides any configuration 
information; as such, it provides a means to disable all authentication-failure traps. 
This object is stored in non-volatile memory so that it remains constant between re-
initializations of the network management system. 

InPkts 

This is the total number of messages delivered to the SNMP device from the transport 
service. 

OutPkts 

This is the total number of SNMP messages that were passed from the SNMP protocol 
device to the transport service.  

InBadVersions 

This is the total number of SNMP messages that were delivered to the SNMP protocol 
device and were for an unsupported SNMP version. 

Summary of Contents for IES-1000 - ANNEXE 7












































































































































Reviews:

No comments