manualshive.com logo in svg

ZyXEL Communications IES-1000 - ANNEXE 7, User Manual, Page: 107 / 139

Share
Download
ZyXEL Communications IES-1000 - ANNEXE 7 User Manual Download Page 107

NetAtlas IES-1000 (AAM1008) EMS User’s Guide 

The Performance Interface Menus 

8-7 

See 

Table 8-4

 for information on fields in these figures. 

8.5  Graph Utilization Statistics 

For details on information formats see 

Chapter 5 

. Utilization statistics can be displayed in graphical format. Click 

Performance

, 

Interface

, 

Graph Utilization Statistics

 and finally click a port (ADSL or Ethernet). 

 

Figure 8-9 Graph Utilization Statistics 

This graph displays the utilization of the LAN ports. 

8.6  Graph Errors-Percent Statistics 

For details on information formats see 

Chapter 5 

. Errors-Percent statistics can be displayed in graphical format. 

Click 

Performance

, 

Interface

, 

Graph Errors-Percent

 

Statistics

 and finally click a port (ADSL or Ethernet). 

Summary of Contents for IES-1000 - ANNEXE 7












































































































































Reviews:

No comments