Chapter 33 Link Layer Discovery Protocol (LLDP)
GS2210 Series User’s Guide
304
The follow ing t able descr ibes t he labels in t his scr een.
33.8 LLDP-MED Network Policy
Click Adv a n ce d Applica t ion > LLD P > LLD P- M ED N e t w or k Policy ( Click H e r e ) t o display t he
scr een as show n next .
Figure 212
Advanced Applicat ion > LLDP > LLDP- MED Net w or k Policy
Table 145
Advanced Applicat ion > LLDP > LLDP- MED Configur at ion
LABEL
DESCRIPTION
Port
This display s t he Sw it ch’s por t num ber. Select * t o configur e all por t s sim ult aneously.
*
Use t his row t o m ake t he set t ing t he sam e for all port s. Use t his r ow fir st and t hen m ake
adj ust m ent s t o each por t if necessar y.
Changes in t his r ow ar e copied t o all t he por t s as soon as you m ake t hem .
Not ificat ion
Topology
Change
Select t o enable LLDP- MED t opology change t raps on t his por t .
MED TLV Set t ing
Locat ion
Select t o enable t ransm it t ing LLDP- MED locat ion TLV.
Net w or k Policy
Select t o enable t ransm it t ing LLDP- MED Net w or k Policy TLV.
Apply
Click Apply t o save t he changes t o t he Swit ch’s run- t im e m em ory. The Sw it ch loses t hese
changes if it is t ur ned off or loses pow er, so use t he Save link on t he t op nav igat ion panel
t o save your changes t o t he non- volat ile m em or y w hen you ar e done configur ing.
Cancel
Click Cancel t o begin configur ing t his scr een afr esh.
