ZyXEL Communications GS2200-24P Series, User Manual, Page: 56 / 360

Chapter 5 Initial Setup Example
GS2200-24/24P User’s Guide
56
5.2 Configuring Switch Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can
configure another IP address in a different subnet for management purposes. The
following figure shows an example.
Figure 21 Initial Setup Example: Management IP Address
1
Connect your computer to any Ethernet port on the Switch. Make sure your
computer is in the same subnet as the Switch.
2
Open your web browser and enter 192.168.1.1 (the default IP address) in the
address bar to access the web configurator. See
Section 4.2 on page 43 for more
information.
3
Click Basic Setting > IP Setup in
the navigation panel.
4
Configure the related fields in the IP
Setup screen.
5
For the VLAN2 network, enter
192.168.2.1 as the IP address and
255.255.255.0 as the subnet mask.
6
In the VID field, enter the ID of the
VLAN group to which you want this
management IP address to belong.
This is the same as the VLAN ID you
configure in the Static VLAN screen.
7
Click Add to save your changes back
to the run-time memory. Settings in
the run-time memory are lost when
the Switch’s power is turned off.